Technical Services & OEM Support

Application Engineering

Our engineers collaborate with your design team to select the optimal compressor model, refrigerant, and system configuration for your specific thermal load profile and operating conditions.

OEM Partnership

Dedicated account management, custom labeling, volume pricing, and integrated logistics for system builders and equipment manufacturers who rely on TecumsehCool compressor platforms.

Spare Parts & Components

Genuine replacement parts including start devices, overload protectors, valve assemblies, and gasket kits. Online cross-reference tools for legacy model identification.

Field Service & Diagnostics

Regional field service teams provide on-site commissioning support, compressor diagnostics, warranty evaluation, and system performance audits.

How We Support Our Partners

Representative engagements demonstrating TecumsehCool technical service capabilities.

OEM Compressor Integration for R-290 Transition

A European commercial refrigeration cabinet manufacturer (150+ retail installations annually across Germany, France, and the Netherlands) needed to transition from R-404A (GWP 3922) to R-290 propane (GWP 3) to comply with the revised EU F-Gas Regulation ahead of the 2025 Ecodesign deadline. The project required a hermetic compressor platform that maintained equivalent cooling capacity within the IEC 60335-2-89 charge limit of 150g R-290 per self-contained circuit.

TecumsehCool application engineers provided calorimeter-verified performance data at evaporating temperatures from -10 C to +5 C, delivered 12 prototype compressor units for the customer's validation testing program, and ramped to production-volume supply of 4,000 units within 14 weeks of design freeze. The resulting cabinet series achieved an EER of 2.8 at standard rating conditions, representing 18% lower energy consumption than the previous R-404A platform, verified through independent testing at an AHRI-accredited laboratory.

Cold Chain Diagnostic Audit

A national food distribution company operating 12 cold rooms across three distribution centers in the U.S. Midwest experienced intermittent temperature excursions exceeding 3 K above the -18 C freezer setpoint, threatening HACCP compliance and risking product loss on perishable inventory valued at over $2 million per facility.

TecumsehCool field engineers conducted systematic compressor health assessments across all 12 rooms using vibration spectral analysis (identifying bearing wear signatures above 4 mm/s RMS velocity), refrigerant charge verification (3 units found 15-20% undercharged via subcooling measurement at the condenser outlet), and suction/discharge pressure profiling against AHRI-rated performance curves. Two additional units showed discharge valve plate erosion reducing volumetric efficiency by approximately 8%. Targeted component replacement and refrigerant charge correction restored all 12 rooms to within 0.5 K of setpoint within 72 hours of the initial site visit.

40+ Service Centers Worldwide

24hr Average Response Time

95% Parts In-Stock Rate

150+ OEM Partners Globally